Hydrolite SF200-9 Transducer

1. Setup should be completed prior to each survey.
2. Power on the unit by plugging the transducer into the rectangular power unit. The light should flash green.
   
3. Connect to the unit via WiFi. The units name should be HydroLite:
   
4. Once you are connected to the unit open a web browser and input the following web address then hit enter: hydrolite.lan or 192.168.199.1
   You should be greeted with the following:
   
5. Press the menu button.
   
6. For Preferences turn on metric.
   

7. For output format select Sonarmite (Old) for both.

   

8. For Sound velocity you have to measure the water temperature then apply the corresponding sound speed from the below table. 

   Fresh Water
   

   Salt Water

   

   

    

MORE INFORMATION

For additional information or assistance, contact 1800 800 874 or email support@upgsolutions.com