Andrew Follows
- Total activity 19
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 10
Activity overview
Latest activity by Andrew Follows-
Andrew Follows created an article,
Expiry
Trimble License Manager The expiry date of a subscription is shown on the right side of the Licenses page. Licenses cannot be bought or renewed in Trimble License Manager. You will need to eith...
-
Andrew Follows created an article,
GNSS Output Settings
GNSS output settings should be set up to reference the frame and location you are to be working in. Inside Trimble Mobile Manager, navigate to the “GNSS Configuration” menu. If you are u...
-
Andrew Follows created an article,
Firmware Updates
Firmware Updates Make sure your device is connected to the internet then turn on the DA2 and Connect it to Trimble Mobile Manager. When a link has been established, it will automaticall...
-
Andrew Follows created an article,
Connection Issues
The DA2 will not power on Make sure your DA2 is connected to the power source before turning on the receiver. Disconnect the USB and re-connect to the battery pack. Check the battery pack...
-
Andrew Follows created an article,
Catalyst Subscriptions
The DA2 achieves four levels of precisions via the “Catalyst” correction services, an archives accuracy from 60cm, though to 30cm, 10cm, and down to 1cm. Both annual and month subscriptions are ava...
-
Andrew Follows created an article,
Location Sharing
Android Device To ensure that location sharing is turned on in Trimble Mobile Manager:1. In Trimble Mobile Manager, tap the three-bar menu and select Application settings. 2. In the Share location ...
-
Andrew Follows created an article,
Syncing Issues
TerraFlex If your forms have not synced between the Trimble Connect map workspace and TerraFlex, please try pressing the Sync button in the TerraFlex main menu. Full sync has been achieved when a ...
-
Andrew Follows created an article,
Connecting to a Trimble GNSS receiver
Connecting to a Trimble GNSS receiver 1. Go to the Settings menu in TerraFlex. 2. Click on Location Service. 3. Ensure that your Bluetooth receiver is turned on and in pairing mode. 4. The devic...
-
Andrew Follows created an article,
Vector Layers
Supported Vector Layers A user can import data into the Trimble Connect map workspace in the following file formats: Shapefile – Import one or more Shapefiles, contained in a .zip file. Point, lin...